The CUBRO µTap is designed to tap one 10/100 Base-T link. This small, flexible and cheap Tap that doesn't require electricity is the ideal device for users who only need monitoring from time to time.
The setup is very simple and needs no
configuration at all. On the monitoring output any standard NIC card can be used as the receiving device in combination with any capture tool „example: Wireshark“
But you need two NIC cards to capture both directions !
In case you dont cave two NIC cards in your computer you can use the Cubro Ethernet USB Converter. This plug-and-play device adds two full ethernet interfaces to your computer and then you can capture poth directions easily.
- General Functions: 10/100 tapping
- Special Funktion: full passiv
Amount of in and out ports:
- 4 x RJ45 10-100
- Port Bandwitdh: 10 Mbit | 100 Mbit
- Supported Connections: RJ45
- Managment: no